Appendix B: Log Messages
Peer failed PAP authen level 3
The PPP peer’s reported PAP username and/or password does not match the Express XL/XLT’s parameters. This is most likely caused by PPP peer sending incorrect username and/or password. Make sure the Configuration/Connec- tion List/Authentication parameters Rx Username and Rx Password are cor- rectly entered. Also, if using RADIUS, check that the server is configured and running properly.
Peer refused authen level 3
The PPP peer would not allow the Express XL/XLT to authenticate it using the method set in Configuration/Security/PPP.
Peer refused SpanTree level 4
The PPP peer would not participate in the Spanning Tree protocol. This is a warning message only. Bridging will still occur across the WAN port so care must be taken that no loop topologies exist across the connection.
PPPtx[x] … level 6
Advance debugging decode of transmitted PPP configuration packets.
PPPrx[x] … level 6
Advanced debugging decode of received PPP configuration packets.
Call Log Messages
Answer <number> level 5
An incoming call from <number> was answered. If no caller ID is available for the ISDN line then <number> will be blank.
AutoSpid Download Not Available level 4
Lucent AutoSpid download is not available from this ISDN switch.
AutoSpid Download Pass level 4
Lucent AutoSpid download feature has successfully installed the SPIDs.
Express XL/XLT User Manual | 125 |
