Preparing the Camera
Inserting the battery
1 | 2 | Battery/card |
| compartment cover | |
|
| |
|
| 1 |
Battery/card compartment lock
2
Battery lock knob
Insert the battery as illustrated with the C mark toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may produce heat or an explosion.
Insert the battery while sliding the battery lock knob in the direction of the arrow.
Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery.
Turn off the camera before opening the battery/card compartment cover.
When using the camera, be sure to close the battery/ card compartment cover.
3 1
2
Charging the battery and setting up using the supplied CD
Connect the camera to the computer to charge the battery and use the supplied CD for setup.
User registration using the supplied CD and installation of [ib] computer software is available on Windows computers only.
The camera battery can be charged while the camera is connected to a computer.
●The indicator lamp lights during charging and turns off when charging is complete.
Charging takes up to 3.5 hours.
If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, computer, or USB cable may not be functioning as expected.
We recommend that you use a computer equipped with Windows XP (Service Pack 2 or later), Windows Vista, or Windows 7. See “Charging the battery with the included
EN 13