For information on using the menus, see “Setup menu” (p. 6).
s(Settings 2) X Pixel Mapping
This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.
For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again.
To adjust the image processing functionPress the A button when [Start] (Submenu 2) is displayed.
●The check and adjustment of the image processing function starts.
s(Settings 2) X s
To adjust the monitor brightness1Use FGto adjust the brightness while viewing the screen, and then press the A button.
s
Back MENU | Set OK |
s(Settings 2) X TV Out
The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type.
| Submenu 2 |
| Submenu 3 | Application | |||
|
|
| NTSC | Connecting the camera to a TV in North America, Taiwan, Korea, Japan, | |||
| Video Out |
| and so on. | ||||
|
|
|
|
| |||
|
|
| PAL | Connecting the camera to a TV in European countries, China, and so on. | |||
| HDMI Out | 480p/576p, 720p, | Set the signal format to be given priority. If the TV setting does not match, | ||||
| 1080i |
| it is changed automatically. | ||||
|
|
|
| ||||
|
|
|
|
|
|
| |
| HDMI Control | Off |
| Operate with the camera. | |||
|
|
|
|
| |||
On | Operate with the TV remote control. | ||||||
|
|
|
The factory default settings differ according to the region where the camera is sold.
EN 51