For information on using the menus, see “Setup menu” (p. 6).

When erasing pictures in the internal memory, do not insert the card into the camera.

Protected images cannot be erased.

With SZ-20, the grouped sequential images can be erased collectively. (p. 23)

To individually select and erase images [Sel. Image]

1Use FGto select [Sel. Image], and press the A button.

2Use HIto select the image to be erased, and press the A button to add a Rmark to the image.

●Turn the zoom lever to the W end to display an index view. Images can be quickly selected using the FGHIbuttons. Turn to the T end to return to the single frame display.

Sel. Image

4/30

Rmark

OK

Erase/Cancel MENU

3Repeat Step 2 to select the images to be erased, and then press the mbutton to erase the selected images.

4Use FGto select [Yes], and press the A button.

●The images with a Rmark are erased.

To erase all images [All Erase]

1Use FGto select [All Erase], and press the A button.

2Use FGto select [Yes], and press the A button.

Saving print settings to the image data [Print Order]
q(Playback menu) X Print Order

“Print reservations (DPOF)” (p. 58)

Print reservation can be set only for still images that are recorded to the card.

Protecting images [R]
q(Playback menu) X R

Protected images cannot be erased by [Erase] (p. 24, 46), [Sel. Image] (p. 47), or [All Erase] (p. 47), but all images are erased by [Memory Format]/[Format] (p. 48).

1Use HIto select an image.

2Press the A button.

●Press the A button again to cancel the settings.

3If necessary, repeat Steps 1 and 2 to protect other images, and press the mbutton.

Rotating images [y]
q(Playback menu) X y

1Use HIto select an image.

2Press the A button to rotate the image.

3If necessary, repeat Steps 1 and 2 to make settings for other images, and press the mbutton.

The new picture orientations will be saved even after the power is turned off.

EN 47