AUTO
FULL
Cancel MENU | Save OK |
Guide
3When shooting reaches the end of the guide on the monitor, it finishes automatically.
●The camera automatically processes the images and the combined panorama image is displayed.
●To stop shooting in the middle, press the shutter button or A button. If the camera pauses for a while, shooting automatically finishes.
If the message “Image was not created.” is displayed, shoot again.
4 When shooting with [Auto]1Press the shutter button to take the first frame.
2Move the camera slightly in the direction of the second frame.
AUTO
Target mark 
Pointer
Cancel MENU | Save OK |
Screen when combining images
from left to right
3Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap.
●The camera releases the shutter automatically.
AUTO
Cancel MENU | Save OK |
To combine only two pictures, press the A button before taking a third frame.
4Repeat Step 3 to take a third frame.
●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.
To exit the panorama function without saving an image, press the mbutton.
If the shutter does not automatically release, try [Manual] or [PC].
Taking pictures with [Manual]1Use FGHIto specify at which edge the next picture is to be connected.
Direction for | MANUAL |
combining the next |
|
frame |
|
Set OK
2Press the shutter button to take the first frame. The
EN 31