Taking pictures with [Auto]
1Press the shutter button to shoot the first frame.
2Move the camera horizontally. The image is automatically taken when the subject overlaps the translucent image that is displayed on the monitor.
Taking pictures with [Manual]
1Press the shutter button to shoot the first frame.
2Move the camera in the same way as [Auto] to decide the position, and then press the shutter button.
The first shot image is displayed on the monitor lightly. Decide the position by referencing the image.
To exit 3D shooting mode without saving an image, press the mbutton.
The [Image Size] (p. 39) is fixed to [0]. The zoom ratio is fixed.
The focus, exposure and the white balance are fixed when the first image is taken.
The flash is fixed to [$Flash Off].
EN 33