7 Using OLYMPUS Viewer 2/[ib]

Windows1 Insert the supplied CD in a CD-ROM drive.Windows XP

• A “Setup” dialog will be displayed.

Windows Vista/Windows 7

•An Autorun dialog will be displayed. Click “OLYMPUS Setup” to display the “Setup” dialog.

#Caution

•If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then double-click “LAUNCHER.EXE”.

•If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.

2 Follow the on-screen instructions on your computer.

#Caution

•If nothing is displayed on the camera screen even after connecting the camera to the computer, the battery may be exhausted. Use a full-charged battery.

Multi-connector

USB cable

 

Smaller

 

terminal

Look for this mark.

USB port

#Caution

•When the camera is connected to another device via USB, a message will be displayed prompting you to choose a connection type. Select [Storage].

3

Register your Olympus product.

 

• Click the “Registration” button and follow the on-screen instructions.

4

Install OLYMPUS Viewer 2 and [ib] computer software.

•Check the system requirements before beginning installation.

•Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” button and follow the on-screen instructions to install the software.

7

2/[ib] Viewer OLYMPUS Using

EN 73