Removing all or selected pictures from the print order

You can reset all print reservation data or just the data for selected pictures.

1

Press Q during playback and select [<].

2

Select [<] and press Q.

•To remove all pictures from the print order, select [Reset] and press Q. To exit without removing all pictures, select [Keep] and press Q.

3 Press HIto select images you wish to remove from the print order.

•Use Gto set the number of prints to 0. Press Q once you have removed all the desired pictures from the print order.

4 Select the date and time format and press Q.

• This setting is applied to all frames with print reservation data.

5 Select [Set] and press Q.

Direct printing (PictBridge)

By connecting the camera to a PictBridge-compatible printer with the USB cable, you can print out recorded pictures directly.

1 Connect the camera to the computer using the supplied USB cable and turn the camera on.

USB cable

Multi-

 

connector

Smaller terminal

USB port

•Use a fully charged battery for printing.

•When the camera is turned on, a dialog should be displayed in the monitor prompting you to choose a host. If it is not, select [Auto] for [USB Mode] in the camera custom menus. g“Customizing camera settings” (P. 81)

8

pictures Printing

2 Use FGto select [Print].

•[One Moment] will be displayed, followed by a print- mode selection dialog.

•If the screen is not displayed after a few minutes, disconnect the USB cable and start again from Step 1.

Storage

Print

Exit

Set

Proceed to “Custom printing” (P. 78).

#Cautions

• 3D photos, RAW images, and movies can not be printed.

EN 77