Power supply
Turning on/off the power
Turning on the power
While the recorder is turned off, slide the POWER/HOLD switch to the direction of the arrow.
Turning off the power
Slide the POWER/HOLD switch to the direction of the arrow, and hold it for 0.5 seconds or longer.
•The resume function remembers the stop position before the power is turned off.
Power save mode
If the recorder is on and stops for 5 minutes or longer, the display shuts off and it goes into power save mode.
•To exit power save mode, press any button.
HOLD
Set the recorder to HOLD mode (A)
Slide the POWER/HOLD switch to the [HOLD] position.
A
B
C
•After [Hold] appears on the display, the recorder is set to HOLD mode.
Exit HOLD mode (B)
Slide the POWER/HOLD switch to the c position.
Notes
•If you press any button in HOLD mode, the clock display lights for 2 seconds, but the recorder will not operate.
•If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state unchanged (When playback has ended or the recording has ended due to the remaining memory being used up, it will stop).
1
HOLD supply/ erPow
EN
11