About recording
Recording
Before starting recording, select a folder among [&] to [*]. These five folders can be selectively used to distinguish the kind of recording; for example, Folder [&] might be used to store private information, while Folder ['] might be dedicated to holding business information.
2
Recording
3Press the STOP (4) button to stop recording.
dFile length
d
1Select the recording folder (☞P.15).
2Press the REC (s) button to start recording.
•Turn the microphone in the direction of the source to be recorded.
a | a Recording mode |
| |
| indicator |
| b Elapsed recording time |
| c Remaining recording |
b | time |
c |
|
•[Rec Mode] cannot be changed in the recording standby mode or while recording. Configure this while the recorder is stopped (☞ P.29).
EN
16
Notes
•To ensure recording from the beginning, start recording after you see the display and the LED indicator light on.
•When remaining recording time is less than 60 seconds, the LED indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
•[Folder full] will appear when the recording cannot be made any further. Select other folder or delete unnecessary files before recording (☞ P.25).
•[Memory full] will appear when the memory is full. Delete unnecessary files before recording any further (☞ P.25).
For
•When a microSD card is inserted in the recorder, be sure to confirm the recording media as either [Internal memory]
or [microSD card] so that there is no mistake (☞ P.34).
•If a recording is made in stereo modes ([192 kbps] or [128 kbps]), it will be a monaural recording through the