Inserting and ejecting a microSD card
1
card microSD a ejecting and Inserting
Notes
•It is possible to switch the recording media over to the internal memory (☞ P.34).
•In some cases microSD cards that have been formatted (initialized) by another device, such as a computer, may not be recognized. Be sure to format microSD cards with this recorder before using them (☞ P.35).
Ejecting a microSD card
1While the recorder is in stop mode, open the card cover.
2Push the microSD card inward to unlock it, and let it eject partially.
•The microSD card is visibly out of the slot and can be removed safely.
•If you eject the microSD card when [Memory Select] is set to [microSD card], it will be automatically changed to [Internal memory selected].
3Close the card cover securely.
Notes
•Releasing your finger quickly after pushing the microSD card inward may cause it to eject forcefully out of the slot.
•Some microSD cards or microSDHC cards may not be recognized correctly depending on the manufacturer or type of card due to compatibility issues with this recorder.
•See the Olympus website for a list of microSD cards that have been confirmed to operate with this recorder in conditions prescribed by Olympus. The website
•In the case when the microSD card cannot be recognized, remove the microSD card then put it in again to see if this recorder recognizes the microSD card.
•Always read the instructions that come with your microSD card before using.
•Processing speed may be slower with some types of microSD cards. Processing performance may also be reduced due to repeated writing and deleting. If that happens, reformat the microSD card (☞ P.35).
•Not all operations are guaranteed for microSD cards that have been confirmed to operate.
EN
14