|
|
1. | 1. Place the large work bowl onto the |
| motor housing with the main handle |
| to the left of the power panel. This |
| aligns the bowl to properly engage the |
| safety interlock. Turn the main handle |
| to the right until it “clicks” or “locks” |
| into place. The main handle should |
| now be centered with the Power Panel. |
2. | 2. Inset the Min Chopper Bowl into the |
Large Work Bowl. You may have to | |
| rotate the bowl until it is properly |
| seated. The Mini Chopper Bowl is |
| not properly inserted if it can still |
| be rotated. |
| 3. Place the Mini Blade onto the main |
| motor shaft. You may have to rotate |
| the blade partially to properly “seat” |
| onto the shaft. |
| 4. Place the Work Bowl Cover onto the |
| Work Bowl with the interlock “tab” |
3. | to the left of the main handle. Turn |
| the Cover to the right until it “clicks” |
or “locks” into place. The “tab” should now be aligned with the Main Handle.
4.
17
