Omega OS950 Chapter Six - OS950 Specifications

If you experience measurement problems, review the fol-

lowing troubleshooting steps:

Is the sensor window clean?

Clean the sensor window and reflective cup and repeat the

measurement.

Is the target's surface non-metallic?

Coat metallic surfaces with a non-metallic finish and repeat

the measurement.

Is the target's surface transparent?

Coat transparent surfaces with an opaque non-metallic fin-

ish and repeat the measurement.

Alternatively, put a shiny metallic surface such as aluminum

foil behind the transparent target and repeat the measure-

ment.

Was the instrument's nosepiece in contact with the surface?

Touch the nosepiece flush to the target's surface and repeat

the measurement.

If after applying all of the above solutions, the instrument's

accuracy is still in question, contact Omega for further help.

Chapter Six - OS950™ Specifications

OS951 -50 to 550°F (-45 to 287°C)

OS953 0 to 1000°C (-18 to 538°C)

OS955 186 to 1207°F (86 to 653°C)

OS956 186 to 1600°F (86 to 871°C)

OS951 ± 1% of reading

OS953 ±3% of reading

OS955 ±3% of reading

OS956 ±3% of reading

±1% of max. difference between target temperature and

instrument temperature when touching, for emissivity of 0.8

to 1.0

Approx. 1/4" (6.4 mm)

Repeatability

± 0.1 °F/°C

In AECS Mode

0.1 °F or 0.1 °C