Omega Engineering manual Specifications For Gas Units, FLR1000 FLR1000-D FLR1000-BR-D

E.Specifications For Gas Units

	FLR1000		FLR1000-D		FLR1000-BR-D
Display	None		3.5 Digit LCD,
			0.39” (10mm) high digits
Accuracy		±3.0% Full Scale*
(including linearity)
Repeatability		±0.5% Full Scale*
Pressure Rating		40 psig
		(2.8 bar)
Temperature Rating		Operating Range: 5 to 55ºC
		Storage Range: 0 to 70ºC
Temperature		±0.2% F.S.* or less per ºC
Sensitivity
Wetted Materials	Ryton®			Brass
	316 Stainless*			Ryton®
	Epoxy		316 Stainless*
	Glass			Epoxy
	Sapphire			Glass
			Sapphire
O-Ring Material		Standard - Viton®
		EPDM Optional
Fitting Material	Acetal			Brass
(Standard)
Fitting Material		Acetal, brass, or stainless steel
Optional
Recommended		25 microns or less
Filtration
Compatible Gases		Clean, dry
0-5VDC Output Signal		Standard
		Minimum 2.5 KΩ load
Typical Power	Standard: 12 VDC @ 35 mA (11.5-15 VDC)
Consumption	Model 110 Power Adapter 115/230VAC
Response Time	Typically <30 seconds for 67% of final value
Reliability		100,000 hours MTBF
Certifications		CE Approved
	89/336/EEC (EN 55011 & EN 50082-1)
	73/23/EEC Low Voltage Directive
Ratings		IP10 (NEMA 1)
Warranty		1 year limited

*Specifications from 20-100% of rated flow. Linearity is best fit straight line. All calibrations performed with AIR unless otherwise stated on calibration certificate

pg. 17 of 29