Contents |
|
INTRODUCTION | 1 |
OVERVIEW | 1 |
WHAT ’S INCLUDED | 1 |
INSTALLATION | 1 |
CARD SETUP | 1 |
SOFTWARE INSTALLATION | 1 |
Linux Users | 1 |
SYSTEM INSTALLATION | 2 |
TECHNICAL DESCRIPTION | 3 |
SOFTWARE | 3 |
LINUX USERS | 3 |
3rd Party Software Support | 4 |
ELECTRICAL CHARACTERISTICS | 5 |
Pull Ups | 6 |
50 PIN RIBBON PIN OUT | 7 |
APPLICATION PROGRAMMERS INTERFACE (API) | 8 |
Presetting an Output Port: | 8 |
Interrupts: | 8 |
PORT C | 8 |
Port Configuration: | 9 |
Relative Addressing vs. Absolute Addressing | 9 |
ABSOLUTE ADDRESS | 12 |
DIRECT HARDWARE CONTROL | 14 |
Reading the Inputs: | 14 |
Reading the Outputs: | 14 |
Presetting an Output Port: | 14 |
Writing the Outputs: | 14 |
Bit Set/Reset | 14 |
Port Configuration: | 14 |
Interrupts | 15 |
Port C | 16 |
Register Description (for direct hardware control) | 16 |
SPECIFICATIONS | 22 |
ENVIRONMENTAL SPECIFICATIONS | 22 |
POWER CONSUMPTION | 22 |
MEAN TIME BETWEEN FAILURES (MTBF) | 22 |
PHYSICAL DIMENSIONS | 22 |
Page 3
Image 3
