Note 1: Bit 2&3 set the speed of process totalize. The time it would take process totalize to
reach the non-totalize reading is shown in the following table:
Bit 3 Bit 2 Time to reach regular reading
0 0 1 minute
0 1 1 hour
1 0 1 day
1 1 30 day
3. DECIMAL POINT :
This is one byte (2 characters) as:
value meaning
1 XXXXXX.
2 XXXXX.X
3 XXXX.XX
4 XXX.XXX
5 XX.XXXX
6 X.XXXXX
Note 1: For TC and RTD models, value must be 1 to 3 only.
4. FILTER TIME CONSTANT:
This is one byte (2 characters) as:
value meaning (per no. of readings)
0 No filtering
12
24
38
416
532
664
7 128
Page 11