C UR L US LISTED

IND. CONT. EQ.

51EB

zFOUR SELECTABLE D.C. RANGES

200 ∝A, 2 mA, 20 mA, 200 mA

zMINIMUM AND MAXIMUM DISPLAY CAPTUREzLCD, REFLECTIVE OR RED/GREEN LED BACKLIGHTINGz0.48" (12.2 mm) HIGH DIGITSzOPTIONAL SETPOINT OUTPUT MODULESzOPTIONAL SERIAL COMMUNICATIONS MODULES (RS232 or RS485)zOPERATES FROM 9 TO 28 VDC POWER SOURCEzFRONT PANEL OR SOFTWARE PROGRAMMABLEzDISPLAY COLOR CHANGE CAPABILITY AT SETPOINT OUTPUTzNEMA 4X/IP65 SEALED FRONT BEZEL
GENERAL DESCRIPTION

The DP63000 provides the user the ultimate in flexibility, from its complete user programming to the optional setpoint control and communication capability. This unit accepts a DC Current input signal and provides a display in the desired unit of measure. The meter also features minimum and maximum display capture, display offset, units indicator, and programmable user input. The display can be toggled either manually or automatically between the selected displays.

The DP63000 display has 0.48" (12.2 mm) high digits. The LCD is available in two versions, reflective and red/green backlight. The backlight version is user selectable for the desired color and also has variable display intensity.

The capability of the DP63000 can be easily expanded with the addition of option modules. Setpoint capability is field installable with the addition of the setpoint output modules. Serial communications capability for RS232 or RS485 is added with a serial option module.

The DP63000 can be powered from an optional Power Supply (Model Number DP6-MLPS1), that attaches directly to the back of a DP63000. The DP6-MLPS1 is powered from 85 to 250 VAC and provides up to 400 mA to drive the unit and sensors.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in this literature or on equipment must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

Do not use this meter to directly command motors, valves, or other actuators not equipped with safeguards. To do so can be potentially harmful to persons or equipment in the event of a fault to the meter.

CAUTION: Risk of Danger.

CAUTION: Risk of electric shock.

Read complete instructions prior to

 

installationand operation of the unit.

 

CURRENT

This unit is the DC Current meter. It features 4 current input ranges, that are selected by the user via a programming jumper and software input range selection. The ranges consist of following: 200 ∝A, 2 mA, 20 mA, or 200 mA. Users should select the appropriate current range that covers their maximum signal input.

DIMENSIONS In inches (mm)

Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.15" (54.6) H x 3.00" (76.2) W.

3