Omega Vehicle Security HHTFO manual Error Codes, Analog Out Description

7 ERROR CODES

The following error messages are displayed under certain error conditions:

RS-232

Err2

“- - . -”

Err5

Err6

Display

Err2

“- - - - -”

Analog Out	Description
	Internal memory checksum error. Memory corruption.
	Contact Omega.
Hi-Lo, 0.5 Hz*	Temperature out of maximum instrument limits or no signal
	Argument out of range
	Unrecognized command

*: The exact analog output behavior is a function of the command “o”; see previous Chapter.

Note that these error codes are not applicable when using the FOB100-SOFT software package. This high- level software package is programmed to automatically handle all types of errors, as outlined in the next section.

22