|
| TABLE OF CONTENTS |
|
1 | INTRODUCTION | 5 | |
1.1 |
| HHTFO PRODUCT SPECIFICATIONS | 6 |
1.2 |
| CALIBRATION | 7 |
2 | UNPACKING | 8 | |
3 | QUICK INTRODUCTION | 9 | |
3.1 |
| INSTALLING BATTERIES | 9 |
3.2 |
| MAKING YOUR FIRST MEASUREMENTS | 10 |
4 HHTFO THERMOMETER HARDWARE REFERENCE | 11 | ||
4.1 |
| DISPLAY DESCRIPTION | 11 |
4.2 |
| KEYPAD OPERATION | 11 |
4.3 |
| USING THE BACKLIGHT | 12 |
4.4 |
| THE SETUP MENU | 12 |
4.5 |
| THE LOGGING MENU | 12 |
4.5.1 | File naming convention | 13 | |
4.5.2 | The Format | 13 | |
4.5.3 | The Enable | 14 | |
4.5.4 | The Rate | 14 | |
4.6 |
| STARTING AND STOPPING A LOGGING SESSION | 14 |
4.7 |
| ICON DEFINITION | 14 |
4.8 |
| POWER JACK | 15 |
4.9 |
| PROBE CONNECTOR | 15 |
4.10 |
| RS232 COMMUNICATION INTERFACE | 15 |
5 | USING TEMPERATURE PROBES | 16 | |
5.1 |
| CAUTION | 16 |
5.2 |
| DESCRIPTION | 16 |
5.3 |
| WARNING | 17 |
6 | SERIAL COMMUNICATION DESCRIPTION | 18 | |
6.1 |
| USING HYPER TERMINAL IN WINDOWS | 18 |
6.2 |
| 18 | |
6.3 |
| DETAILED DESCRIPTION OF | 19 |
6.4 |
| TYPICAL TEMPERATURE READING SEQUENCE | 21 |
7 | ERROR CODES | 22 | |
8 | 23 | ||
8.1 |
| GETTING STARTED WITH | 23 |
8.1.1 | Hardware and software requirements | 23 | |
8.1.2 | Installing | 23 | |
8.2 |
| A QUICK TOUR OF | 23 |
8.2.1 | Working with the Configuration Window | 24 | |
8.3 |
| ACQUIRING AND VIEWING TEMPERATURE DATA | 26 |
8.3.1 | Logging temperature data to a file | 26 | |
8.3.2 | Viewing temperature data | 28 | |
8.4 |
| THE FOB100 CONSOLE | 30 |
8.4.1 | Console help menu | 31 | |
8.5 |
| 31 | |
8.5.1 | The File menu | 31 | |
8.5.2 | The Window menu | 32 | |
8.5.3 | The Help Menu | 32 | |
3
