Omega Vehicle Security LDP63100 manual C Ur L Us Listed, General Description, Safety Summary

C UR L US LISTED

IND. CONT. EQ.

51EB

zLARGE LED DISPLAY READABLE TO 180 FEET

zVARIOUS ANALOG INPUT MODULES;

DC VOLTAGE AND CURRENT

PROCESS SIGNALS

TRUE RMS VOLTAGE AND CURRENT

THERMOCOUPLE OR RTD

STRAIN GAGE/BRIDGE

zALARMS, ANALOG OUTPUT, AND COMMUNICATION

zPROGRAMMABLE USER INPUTS

zUNIVERSAL AC POWERED (85 to 250 VAC)

zPROGRAMMING SOFTWARE

zNEMA 4X/IP65

GENERAL DESCRIPTION

The LDP63100 is a versatile display that can increase productivity by offering the plant floor or production area a large visual display of their current status. Whether your measurement is voltage, current, process, temperature, or strain gage, the LDP63100 can satisfy your requirement. Plug-in option cards can add alarms, analog output, and communication/bus capabilities, making the LDP63100 a truly Intelligent Panel Meter.

SAFETY SUMMARY

All safety regulations, local codes and instructions that appear in this and corresponding literature, or on equipment, must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

The protective conductor terminal is bonded to conductive parts of the equipment for safety purposes and must be connected to an external protective earthing system.

CAUTION: Risk of Danger	CAUTION: Risk of electric shock.
Read complete instructions prior to
installation and operation of the unit.

SPECIFICATIONS

Input specifications, wiring, and programming information is contained in the corresponding literature shipped with the ordered model.

1.DISPLAY: 4" (101 mm) Red LED

5-Digit: -19999 to 99999

2.POWER REQUIREMENTS:

AC Input Modules: 85 to 250 VAC, 50/60 Hz, 18 VA

LDP63100 Display: 85 to 250 VAC, 50/60 Hz, 10 VA

3.ANNUNCIATORS:

Display Indication: Three vertical dots on the left side of the unit identify the displays for the following modes:

TOP Maximum

MIDDLE Minimum

BOTTOM Total

Setpoint Indication: Four vertical dots on the right side of the unit identify the setpoint “ON” condition, with SP 1 being the top position through SP 4 at the bottom.

4.LDP63100 Programming: The unit is a large display, designed to be remotely mounted. Therefore, the unit does not have a programming keypad. Unit programming should be accomplished by one of the following methods: Rear Terminal Block: External switches can be wired via the terminal block to allow unit programming. A minimum of 3 switches would be required. Optional Programming Remote (LDP6-PGM): This option provides a 10 foot interconnecting cable and programming box. The Programming

Remote contains buttons allowing easy programming of the display. Optional Serial Programming: You can purchase an RS232 or RS485 Comms

Card and program the unit via Crimson, a Windows® based software program.

DIMENSIONS In inches (mm)

3