Step 8 — Attaching the Tilt-PA to the Pipe
Tighten Here
1.Thread and tighten Tilting Pipe Adapter onto 1.5” NPT Pipe (not included).
2.Tighten Tilt Tension Nut before attaching Adapter.
Step 9 — Attaching the Adapter and Display to the Pipe Adapter
Note: Pipe removed for clarity
3.Align the space between the top Nuts with the grooves in the Tilting Pipe Adapter and gently lower the Adapter.
4.
4.Thread the last Nylock Nuts (2) onto the bottom two Stud Screws.
5.Securely tighten all Nylock Nuts
2 | 11 |
