Step 10 — Adjusting Tilt

C.

B.

A.

To adjust tilt

1.Hold A with 3/4” Socket

2.Loosen B with 3/4” Socket

3.Loosen C with 9/16” Socket

4.Position Display

5.Tighten A,B, & C

Specifications are subject to change without prior notice.

Every effort has been made to provide accurate and error-free assembly and installation. Omni- Mount Systems disclaims liability for any difficulties arising from the interpretation of information contained in these instructions. If OmniMount products are used for purposes other than their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property damage, direct, indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been designed and manufac- tured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or accident.

PN —9/05

Installation Instructions

TPUM-1: Tilting Pipe Adapter

Designed for 26” - 55” Flat Panel TV’s

Maximum Weight Capacity: 175 lbs. (79.4 Kg)

Connects to 1.5” NPT Pipe

12

Page 1
Image 1
Omnimount TILT-PA installation instructions TPUM-1 Tilting Pipe Adapter, Adjusting Tilt