Step 7 — Attaching the UM1 to the Display
Display
Square
Washer
Back
Plate
Spacer | Mounting |
Screw | |
(if needed) |
|
1.Thread Mounting Screw through Square Washer, Rail, Spacer (if needed), and into the Display’s Mounting Holes.
NOTE: Ensure Retaining Screws are loose enough to allow for adjustment
2.Center the Back Plate on the Display and securely tighten the Retaining Screws and Mounting Screws
Important
DO NOT over tighten the mounting screws, or the display may be damaged. NEVER use a power driver to tighten the mounting screws.
Required Tools:
Ratchet and 5/16” Deep Socket
or
5/16” Open Wrench
or
Adjustable Spanner Wrench
Large Universal Adapter Component Guide
Extended Rails
Channel | Back Plate |
|
Standard Rails
10 | 3 |
