Step 4 — Rail Installation | Step 1 — Set Studs in |
Standard Configuration | Narrow Configuration |
Step 5 — Secure Sliders and Back Plate | Insert Stud |
| |
| Screws Here |
| 1. Insert Stud Screws (4) into front of Adapter. |
1. Set Rails to horizontal distance between Mounting Holes on Display. |
|
2. Loosely thread Slider Retaining Screws through Channels into Sliders
2.Thread Flange Nuts (4) onto Stud Screws and tighten using a 5/16” Socket.
3.Thread Nylock Nut (2) onto the two top Stud Screws leaving space between Nylock and Flange Nuts.
8 | 5 |
