| Table of Contents |
|
1.0 | Overview | 3 |
2.0 | Port Structure | 4 |
2.1 | Overview | 4 |
2.1.1 | Serial Console Port | 4 |
2.1.2 | Daisy Chain Ports | 4 |
2.1.3 | UTP Management Port | 5 |
2.1.4 | Ethernet Backplane Port | 5 |
3.0 | Installation Procedure | 8 |
3.1 | Overview | 8 |
3.2 | Configuring Switches | 8 |
3.2.1 | Ethernet Crossover Switch | 8 |
3.2.2 | Backplane Enable Switch | 8 |
3.3 | Installing the Module and Connecting the UTP Cable | 8 |
3.4 | Configure the Module via Command Line Interface | 9 |
3.4.1 | Setting IP and Control Preferences | 11 |
3.4.2 | Setting SNMP Preferences | 14 |
3.4.3 | Management Support | 16 |
3.4.4 | Enabling/Disabling | 16 |
3.4.5 | Access the NMM Remotely | 18 |
3.5 | Verify Operation | 20 |
4.0 | Module Status | 21 |
4.1 | Overview | 21 |
5.0 | NMM Specifications | 23 |
6.0 | Troubleshooting Guide | 24 |
6.1 | Overview | 24 |
6.1.1 | Power Issues | 24 |
6.1.3 | UTP Issues | 24 |
7.0 | Warranty | 25 |
Page 2
