Omron D4BL manual Approved Standard Ratings, Characteristics, TÜV EN60947-5-1, CCC GB14048.5

■Approved Standard Ratings

TÜV (EN60947-5-1), CCC (GB14048.5)

Item		Standard model		Indicator model
Utilization category		AC-15		AC-15
Rated operating current (Ie)		3 A		6 A
Rated operating voltage (Ue)		250 V		115 V
Use a 10-A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device.
UL/CSA (UL508, CSA C22.2 No. 14)
A300
Rated voltage	Carry current			Current				Volt-amperes
				Make		Break	Make		Break
120 VAC	10 A		60 A		6 A		7,200 VA		720 VA
240 VAC			30 A		3 A

Note: The UL/CSA approved rating for products with indicators (-A) is 6 A/115 VAC.

■ Characteristics

Degree of protection (See note 2.)	IP67 (EN60947-5-1) (This applies for the Switch only. The degree of protection for the key hole is
	IP00.)
Durability (See note 3.)	Mechanical: 1,000,000 operations min.
	Electrical: 500,000 operations min. (10-A resistive load at 250 VAC)
Operating speed	0.05 to 0.5 m/s
Operating frequency	30 operations/min max.
Rated frequency	50/60 Hz
Contact gap	2 x 2 mm min.
Operating characteristics	Direct opening force:	19.61 N min. (EN60947-5-1) (See note 4.)
	Direct opening travel: 20 mm min. (EN60947-5-1) (See note 4.)
	All stroke:	23 mm min.
Lock holding strength	700 N min. (GS-ET-19)
Insulation resistance	100 MΩ min. (at 500 VDC)
Rated insulation voltage (Ui)	300 V (EN60947-5-1)
Conventional enclosed thermal current	10 A (EN60947-5-1)
(Ithe)
Dielectric strength (Uimp)	Impulse dielectric strength (Uimp) 4 kV (EN60947-5-1) between terminals of different polarity, between
	each terminal and ground, and between each terminal and non-current-carrying metal part;
	2.5 kV between solenoid and ground (EN60947-5-1)
Conditional short-circuit current	100 A (EN60947-5-1)
Pollution degree (operating	3 (EN60947-5-1)
environment)
Protection against electric shock	Class I (with ground terminal)
Switching overvoltage	1,500 V max. (EN60947-5-1)
Contact resistance	50 mΩ max. (initial value)
Vibration resistance	Malfunction: 10 to 55 Hz, 0.35-mm single amplitude
Shock resistance	Destruction: 1,000 m/s2 min. (IEC68-2-27)
	Malfunction: 300 m/s2 min. (IEC68-2-27)
Ambient temperature	Operating: –10°C to 55°C (with no icing)
Ambient humidity	Operating: 95% max.
Weight	Approx. 800 g

Note: 1. The above values are initial values.

2.The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for the operating conditions and environment beforehand. Although the switch box is protected from dust, oil or water penetration, do not use the D4BL in places where dust, oil, water, or chemicals may enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.

3.The durability is for an ambient temperature of 5°C to 35°C and an ambient humidity of 40% to 70%.

4.These figures are minimum requirements for safe operation.

Safety Door Switches D4BL

Guard Lock Safety-door Switch D4BL A-69