ERROR INDICATORS
ERROR DISPLAY | CAUSE | CORRECTION |
|
|
|
|
| Make sure you are barefoot and the |
| Your toes and heels are | soles of your feet are clean and dry. |
| Make sure your feet are correctly | |
| not positioned over the | |
| positioned on the measurement platform. | |
| electrodes correctly. | |
| Read “How to Take a Measurement” | |
|
| |
|
| on page 14. |
|
|
|
| The measurement position was not | Remain still and do not move until |
| stable or your feet were not | the measurement is complete. |
| placed correctly. | Read “How to Take a Measurement” |
| on page 14. | |
|
| |
|
|
|
|
| Slightly moisten the soles of your |
|
| feet with a damp towel and retake |
| Feet are too dry. | the measurement. |
|
| Refer to the Conditions and Actions |
|
| Table on Page 14. |
|
|
|
|
| Check the settings entered for your |
| The body fat percentage or BMI | personal data. Change the settings |
| if needed. Retake the measurement. | |
| values are outside the | |
| If this error occurs again and the | |
| measurement range. | |
| settings are correct, measurements | |
|
| |
|
| cannot be taken. |
|
|
|
|
| Remove the batteries. Wait one minute. |
|
| Reinstall the batteries. Refer to Battery |
| The unit is not set up correctly. | Installation on page 9. |
|
| Press the power switch and turn the |
|
| monitor on. Retake the measurement. |
|
|
|
| You stepped onto the measurement | Wait until 0.0 lb is displayed before |
| platform before 0.0 lb | stepping onto the |
| was displayed. | measurement platform. |
|
|
|
| The unit was moved before 0.0 lb | Do not move the unit until 0.0 lb |
| was displayed. | is displayed. |
|
|
|
| Movement during measurement. | Do not move until measurement |
| is complete. | |
|
| |
|
|
|
| This unit can only be used by people | This unit can only be used by |
| weighing less than 330 lbs. | people weighing less than 330 lb. |
|
|
|
16
