SETTING PERSONAL DATA
The Fat Loss Monitor with Scale provides two options to enter your personal data.
•Select USER and a Personal Profile Number to save your personal data. The monitor will store 4 personal profiles in the memory. Select a number 1 through 4. Use this number to enter your personal data and when taking a measurement.
•Select GUEST/MEMORY if you do not want your personal data stored in the memory. When you
select the GUEST mode you will need to enter your personal data before taking each measurement. NOTE: The unit will automatically turn off after five minutes if no button is pressed.
1.Turn the monitor ON.
Press the Power Switch. The CAL symbol blinks on the display followed by the 0.0 lb symbol as illustrated below.
NOTE: Wait for the 0.0 lb symbol to appear before proceeding.
2. Select USER or GUEST as your personal data option.
A. USER with Personal Profile Number
Press the USER button.
The Personal Profile Number changes each time you press the
USER button as follows:
Select the Personal Profile Number for your data.
NOTE:
1)If no information has been entered for the Personal Profile Number you selected, the number and the symbols for gender, age, and height blink on the display.
2)If personal data has been entered for the number, the Personal Profile Number blinks on the display.
Press the SET button.
The default value “40” for age blinks on the display.
B. GUEST
Press the GUEST/MEMORY button.
The GUEST indicator appears.
Press the SET button.
The default value “40” for age blinks on the display.
10
