HOW TO TAKE A MEASUREMENT
Before taking a measurement your personal data must be entered.
If GUEST is used, you will need to enter your personal data prior to taking the measurement. Refer to page 14, Setting the Personal Data.
1.Press the On/Off button.
All display symbols appear for approximately one second. The display symbols disappear and the GUEST symbol starts to flash.
2.Select your Personal Data Option.
2a. Press the Set button for Guest. Enter your personal data.
2b. Press the Up button to select your Personal Profile Number.
The 
indicator appears on the screen.
3. Stand with both feet slightly apart.
4. Place both hands on the monitor by holding the grip electrodes.
Wrap your middle finger around the groove of the handle. Place the palm of your hand on the top and the bottom electrodes. Put your thumbs up, resting on the top of the monitor as illustrated.
NOTE: The electric resistance may not be measured correctly in the following cases:
Your fingers | Your hands are unevenly |
are apart from | positioned toward the |
the grips. | top or bottom of |
| the electrodes. |
17
