3.Using the Unit
3.4Using the Memory Function
This unit has a memory capable of storing 21 sets of readings. Every time you complete the measurement, the unit automatically stores the blood pressure and pulse rate.
If there are three readings within 10 minutes of the last reading, the average of the three readings is displayed. (If there are only two readings in memory for that period, the average will be based on two readings. If there is only one reading in memory for that period, that reading will be displayed as the average value.)
Note: When 21 sets of readings are stored in memory, the oldest set will be deleted to store a new set.
1. Press the O/I button to turn the power on.
2.When the heartbeat symbol appears 
on the display, press the MEMORY button.
EN |
If there are three readings stored in memory that were taken within 10 minutes of the last reading, an average value for those reading is displayed. (If there are only two
readings in memory for that period, the average will be based on two readings. If there is only one reading in memory for that period, that reading will be displayed as the average value.)
23
