3.Using the Unit
Note: If there are no measurements results stored in memory, the screen to the right is displayed.
3. Press the MEMORY button again, while the average values screen is displayed.
The result from the most recent measurement is displayed.
The date and time of each measurement is displayed alternately with the measurement values.
Important: If your systolic or diastolic pressure is outside the standard range, the heartbeat symbol will blink when the measurement result is displayed. Refer to 3.3, number 7.
4. Press the MEMORY button repeatedly to cycle through the previous measurement results.
Keep the button pressed down to cycle rapidly through the previous results.
If the irregular heartbeat symbol was displayed at the time of a measurement, this is displayed when that result is displayed.
5.Press the I/O button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off after five minutes.
24
