3.Using the Unit
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the unit will be deleted.
1. To delete stored readings, first press |
|
the MEMORY button. Then while |
|
holding it down, press the I/O button | 2 |
simultaneously for about
deleted.1
Important: Be careful not to press the I/O button first. If the I/O button is pressed first, the monitor is shut off.
2.Press the I/O button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off after five minutes.
EN |
Notes:
•If the date and time are reset to a time before the most recent measurement, the average value will be based on any measurements taken after the date and time were reset. However, you can still view the readings stored in memory.
•Please note that all measurements are stored in the memory. If different people measure with the same device, make sure that you are aware of this fact.
25
