WARNING

Never disassemble, repair, or modify the main unit and cables.

zDo not disassemble, repair, or modify this product. Doing so may result in electric shock, fire, or personal injury.

Do not handle the device with wet hands. Do not touch the terminals while the device is connected to the power supply.

zElectric shock hazard.

Do not allow the cables to be in contact with heaters.

zThe cable sheaths may melt and the exposed wire may cause electric shock or fire.

Be sure to connect to a grounded main outlet for AC adapter power cord.

zNot doing so may result in fire or electric shock hazard.

Do not use the power cords and power adapters not supplied with the products.

zFailure to do so may results in electric shock, fire, or personal injury.

Connect and disconnect cables as described in the following procedures when installing, moving, on this product or attached devices.

To connect:

1.Turn everything OFF.

2.Attached all cables to devices.

3.Attached power cords to outlet.

To disconnect:

1.Turn everything OFF.

2.Remove power cords from outlet.

3.Remove all cables from devices.

Failure to do so may result In spark or deform or damage the device.

Caution

Do not drop the device or apply physical shock.

zDoing so may result in personal injury or device damage.

Do not apply strong force to, or place heavy items on the device or cables.

zDoing so may deform or damage the device, resulting in electric shock or fire.

Do not lean against or otherwise apply excessive force to the Antenna body.

zDoing so may result in personal injury or device damage.

Use and store the product in an environment that is specified in the catalog or operation manual.

zFailure to do so may cause failure of the device, electric shock, or fire. Do not use or store the device in the following locations:

Locations that do not satisfy the specified operating conditions (-10 to +55, 35%RH to 85%RH,non-condensing).

Locations that do not satisfy the specified storage conditions (-25 to +65, 35%RH to 85%RH,non-condensing).

Locations where the Reader/Writer is exposed to direct sunlight.

vi

Page 6
Image 6
Omron V720-HS04 user manual Do not allow the cables to be in contact with heaters