TAKING A MEASUREMENT
The monitor is designed to take measurements and store the measurement values in the memory for two people using USER ID A and USER ID B.
The monitor can also be used to take a single measurement for other persons using the GUEST Mode. The USER ID symbol is not displayed when using the GUEST Mode. Measurements taken using the GUEST Mode are not stored in the memory.
WARNING
Contact your physician for specific information about your blood pressure.
CAUTION
Operate the device only as intended. Do not use the device for any other purpose.
CALIBRATION CHECK SYSTEM
When you press the START/STOP button, the Calibration Check System light turns on and the unit starts monitoring your readings using dual sensors. If the unit is accurate and functioning correctly, the Calibration Check System light remains lit during the measurement. If an error is detected, the Calibration Check System light flashes and “ER” will appear on the display.
CUFF WRAP GUIDE
This monitor checks whether the arm cuff is wrapped around the arm correctly during the inflation. When the cuff is wrapped correctly, 
is displayed while taking a measurement or using the memory function. If the cuff is not wrapped correctly, 
is displayed. If 
is displayed, refer to the section “Applying the Arm Cuff”, wrap the cuff firmly around the arm and take another measurement.
30
