TAKING A MEASUREMENT
SELECTING THE USER ID
Select your USER ID. Always use the same USER ID when taking a measurement. The monitor stores the measurement values in the memory by the USER ID selected. These measurement values are used to calculate the Morning Averages and Evening Averages.
Slide the USER ID Selection Switch right or left to select USER A or B.
USING THE USER ID
After you select a USER ID, the monitor can be set to take one measurement using the Single Mode or three consecutive measurements using the TruReadTM Mode.
NOTE: The default value is set to the Single Mode to take one measurement. Refer to “Setting TruReadTM”.
32
