SETTING PERSONAL DATA
To measure Body Composition, your personal data must be set. Your personal data includes your age, gender and height. The Full Body Sensor Body Composition Monitor and Scale provides two options to enter your personal data.
1)Select a personal profile number to save your personal data. The monitor saves up to 4 personal profiles. Select a number 1 through 4. Use this number to enter your personal data when taking a measurement.
2)Select 
UP/GUEST button if you do not want your personal data stored in the memory. When you use the Guest mode you will need to enter your personal data each time you take a measurement. Measurement results are not stored in the memory when the Guest mode is used.
Buttons Used in this Procedure
Personal Profile Number Button | Personal Profile Number Button |
SET Button
Use this button to confirm the personal data and move to the next item after confirming the set item.
|
| DOWN/MEMORY Button |
|
|
|
|
|
|
| UP/GUEST Button |
|
|
| ||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||||||
Press this button to go back one. |
|
|
|
|
|
| ||||
|
|
| Press this button to advance one. | |||||||
Press continuously to rapidly |
|
|
| Press continuously to rapidly | ||||||
decrease. |
|
|
| advance. | ||||||
| ||||||||||
| ||||||||||
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
2. Lift the Display Unit out of the Display Unit Holder.
NOTE: This monitor can be set to either the US or Metric System. Personal Profile and memory will be displayed by selected system. To change the US/Metric mode:
1) Press and hold the 
DOWN/MEMORY button until “lb” and “kg” blink on the display.
2)Press the 
DOWN/MEMORY button to select the mode, “lb” or “kg”. This will automatically change “cm” and “feet/inch” under height setting.
3)Press the SET button to confirm the change.
21
