10.Click on the Associated Stations link (beside the SSID) to display a list of wireless devices associated with this WAP. The list includes the wireless device MAC address and connection status (see Figure 18).
Figure 18
11.The Channel field allows you to select which channel this device will use to communicate with other wireless devices in the network. Click on the down arrow at the right of the field to see the selections (as shown in Figure 19). The default channel is Channel #1.
Figure 19
NOTE: The IEEE 802.11g standard supports up to 13 channels worldwide. Each channel is assigned a center frequency 5 MHz higher or lower than the adjacent channel. A 30 MHz separation may be required to avoid interference between two wireless networks operating in close proximity. Each associated wireless client must use the same channel number in order to communicate.
12.The WAP 802.11g can have its Operation Mode set to operate in either an 802.11b client only mode, an 802.11g client only mode, or a mixed mode as shown in Figure 20.
Figure 20
13.The Transmit Rate allows you to select the data transmission rate from 1 Mbps to 54 Mbps for devices as shown in Figure 21. The default is Auto.
Figure 21
301 Fulling Mill Road, Suite G | ©Copyright 2005 by |
Middletown, PA 17057 | www.onqlegrand.com |
|
Page 13
