On-Q/Legrand HMS 1100 owner manual Show Message, Log Message, Clear Message, Say Message, Page

Message

To show, log, clear, and send text messages, and to say and phone (dial out) your voice messages, press the 8 (MESSAGE) key:

MESSAGE

1=SHOW 2=LOG 3=CLEAR↓

4=SAY 5=PHONE 6=SEND

↑

Show Message

The 1 (SHOW) key allows you to display the selected text message(s) on the console's top-level display. This can be a helpful reminder of special events and occasions.

TRASH	NIGHT	↓
ENTER	MESSAGE

You may enter the message number followed by the ' # ' key to display that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to display the selected message:

Thu Oct 04,	01 4:06 PM
TRASH NIGHT

When the message is displayed, the console will beep 4 times and the console LED will flash continuously. You may press the

'* ' key to acknowledge seeing the message. This will cause the LED to stop flashing, however, the message will remain on the display until it is manually cleared, or cleared by a program.

Log Message

The 2 (LOG) key allows you to store the selected text message(s) in the Event Log. This can be a helpful to keep track of the times and dates of events and occurrences.

You may enter the message number followed by the ' # ' key to log that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to log the selected message.

Clear Message

The 3 (CLEAR) key allows you to clear the selected text message, or all text messages from the console's display.

TRASH	NIGHT	0=ALL ↓
ENTER	MESSAGE

You may enter the message number followed by the ' # ' key to clear that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to clear the selected message, or press 0, then ' # ' to clear all messages.

Say Message

Note: To Say a message, the HMS Two-Way Audio Module (with a speaker) must be installed.

The 4 (SAY) key allows the controller to say the selected voice message over a speaker. This voice message can be an audible reminder of special events and occasions.

You may enter the message number followed by the ' # ' key to say that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to say the selected message.

Page 31