Edit Programs When, Times Programs | On-Q/Legrand HMS 1100 specification

Edit Programs When

Selecting the 1 (WHEN) key, from the Edit Program menu, allows the time or button/event that activates the program to be changed. The display shows:

EDIT WHEN 1=TIMED 2=BUTTON

Times Programs

Selecting 1 (TIMED) sets the program to be activated at a specific time of day. You are prompted to enter the time and date or days of week. The current default value is shown for each item. Press ' # ' to accept the default.

12:00 AM 5/17 1=TIME 2=DATE/DAY

Select 1 (TIME) to enter the new time. If the desired time is the time in which sunrise or sunset will occur, press the up arrow key for sunrise, or the down arrow key for sunset before entering a time.

TIME: 12:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

You may also choose to have the program execute up to 120 minutes before or after the time of sunrise or sunset.

SUNSET

1=BEFORE 2=AFTER #=AT

If the 1(BEFORE) or 2(AFTER) key is selected, you will be prompted to select the amount of minutes:

ENTER OFFSET: 0-120 MINUTES

When entering a time of day, AM/PM must be specified for the time if the AM/PM format is being used. Otherwise the entered time should be 13:00-23:59.

TIME: 8:00 AM

HHMM ↑=RISE/AM ↓=SET/PM

Select 2 (DATE/DAY) to enter a new date or days of week.

DATE: 10/15

MMDD ↓=DAY

Next, specify if the program will run once (on the specified date and then be deleted) or if the program will run every year on the specified date (yearly).

RUN PROGRAM 1=ONCE 2=YEARLY

To change days, press the down arrow (DAY) key. You will be prompted to enter the day(s) that the program will be activated. Press 1-7 for Monday - Sunday, 0 for Once, 8 for Weekdays, and 9 for Weekends, then ' # '.

DAY(S): M-W-F--

1-7=MON-SUN 0=ONCE

Press the ' # ' key and the display will then return to the Edit Program menu:

EDIT PROGRAM

1=WHEN 2=CMD 3=&COND

Page 49

Image 57

On-Q/Legrand HMS 1100 owner manual Edit Programs When, Times Programs

Contents

HMS Page Contents Control Telephone Control Page Underwriters Laboratories Requirements Page Underwriters Laboratories UL Listing Introduction Console Operation Overall Description Display Menus Normal Top-Level Display Main Menu Error BeepsTrouble Beeps To silence the beeper, press the * key Cancel HMS 1100 MaintenanceAreas Confirmation Beep Security System Operation Disarming the Security System and Silencing AlarmsArming the Security System = OFF = Night DLY Night Delay Using Shortcut Keys= Night = Vacation Quick Arm = RestoreBypassing Zones Restoring Zones What Happens When the Alarm is Activated What To Do When You Come HomeBurglar Alarm Activated #=GOTO Fire Alarm Activated Gas Alarm ActivatedEmergency Keys Duress Code Entered or Duress Alarm Activated Alarm ResetAlarm Cancel Master Code Trouble Indications Duress Code Panic SwitchesArea Arming Manager Code Goto Area Testing Your System ALC Switch Modules Control CommandsControl Modules Unit Numbers House Codes Scrolling Through Names Controlling Units Dimming and BrighteningLighting Level Timed Commands Ramp CommandScene Command Compose Internal Flags Status of a UnitControlling Outputs All On / Off Scenes Leviton Scene Control Buttons HMS Thermostats Temperature Control If hold mode is On, Hold is shown Freeze Alarms Temperature AlarmsOutdoor Temperature Temperature Control of Appliances Status Through Show Events Tstat Mode Auto FAN Auto Clear Text Messages Messages Show Message MessageLog Message Clear Message Send Message Pro-Link Phone Message Telephone Interface Telephone ControlIn-House Phones Remote Phones Phone Access Denied Remote Lockout Alternate MethodMain Menu Control TemperatureSecurity Button When the HMS Communicating Thermostat is entered EventsMessage Playing and Recording a Custom Phrase Playing and Recording a Message Panic Button over the Phone # # # # # # Good-ByeEmergency Dial-Out Digital Dialer Voice Dialer How the HMS 1100 Voice Dialer WorksWhat the HMS 1100 Voice Dialer Does PC Access What You Hear If Your HMS 1100 Calls YouEntering the Code Built-In Ethernet Port Connecting to Network via PC AccessController IP Address, Port Number, and Encryption Key HMS 1100 Ethernet Connections Dynamic DNS Local Network Local / Wide Area Network Setup Configuration and Advanced Control Programming ACPSet Up Codes Duress Code Set Up Time Advanced Control Programming ACP = Add Programs= Show Programs Otherwise, a help screen is displayed = Delete All Programs Edit Programs Times Programs Edit Programs When Control Unit Event / ALC Switch Press Event Buttons Security Mode Event ButtonsButton and Event Programs Zone Event Buttons Alarm Event Buttons All On/Off Event ButtonsEvent Buttons Message Event Buttons Pro-Link Miscellaneous Event Buttons Edit Program Command Program Control CommandsProgram Security Commands Program All On / All Off Commands Program Button CommandsProgram Temperature Commands Program Message Commands Edit Program Condition Program Security Mode ConditionsProgram Control Conditions Program Zone Conditions Program Other Conditions Program Time Clock Conditions Set Up Dial Dial Out Number Dial Out NumbersDial Order Set Up Arming Entry DelayExit Delay Set up Miscellaneous Format Number Description House Codes 2-16 X-10 All Off Latitude, Longitude, and Time Zone Zone NameDaylight Savings Controller Port Number Controller IP Address Encryption Key Set Up Names Set Up Address Set Up Voice Fire Escape Planning Underwriters Laboratories Requirements Federal Communication Commission Notice If YOU have Trouble with Your Phones Canadian Industry Canada Notice HMS 1100 Voice Dial-Out Planner Appendix a Dial OUT Planner Press 9. The system will say Good-bye and hang up Instructions to Called Party Code Char Appendix B Text Description Character Codes Code Description Appendix C Voice Description Codes Fall Online Vault Page Page OnQTechnologies,Inc