On-Q/Legrand HMS 1100 All On/Off Event Buttons, Alarm Event Buttons, X-10Event Buttons, Page

All On/Off Event Buttons

Pressing the 4 (ALL) key allows you to specify an event button activated by issuing an All On or an All Off command. You are first prompted to specify whether the event button is for All Lights On or for All Off:

ALL

0=ALL OFF 1=LIGHTS ON

If area arming is being used, you will be prompted to specify the desired area:

AREA:	0=ALL ↓
ENTER AREA

Alarm Event Buttons

Pressing the 5 (ALARM) key allows you to specify an event button activated upon the occurrence of an alarm. You are first prompted to select the type of alarm:

SELECT ALARM TYPE	↓
ANY TYPE

The arrow keys are used to select from a list of alarm types:

•ANY ALARM

•BURGLARY ALARM

•FIRE ALARM

•GAS ALARM

•AUXILIARY ALARM

•FREEZE ALARM

•WATER ALARM

•DURESS ALARM

•TEMPERATURE ALARM

Press the ' # ' key when the desired alarm type is shown. You are then prompted to specify the area, if area arming is being used:

AREA:	0=ALL ↓
ENTER AREA

T he area number should be entered followed by the ' # ' key, or the arrow keys may be used to scroll through a list of areas.

X-10 Event Buttons

Pressing the 6 (X-10) key allows you to specify an event button activation upon receipt of an X-10 command from a source external to HMS 1100. The HMS 1100 can also respond to scene changes initiated at Compose keypads and dimmers. When a scene change is initiated, HMS 1100 can activate an event button program. You are first prompted to enter the X-10 house code:

X-10 HOUSE CODE: 1-16=A-P

You are then prompted to enter the X-10 unit code:

X-10 UNIT CODE:

1-160=ALL

Finally, you are prompted to specify the command that activates the event button:

WHEN X-10 A1: 0=OFF 1=ON 2=SCENE

Page 52