One For All SmartControl Master Power
One For All SmartControl also lets you turn all the devices you use in an activity on and off with a single key press. For
EXAMPLE IFLYOU USEIYOUR 46OAND SATELLITEYRECEIVER TO6WATCHN TV, all you have to do is press and hold the ASTER 
key for 2 seconds to turn these devices on or off once you’ve
pressed the 
key for the watch TV activity.
4OOUSEU/NEE&OR/!LLE3 ART#ONTROL ASTERA0OWER
1.Make sure you’re in the right One For All SmartControl
2.Point the remote control
at the devices and press the ASTER 
key for at least 2 seconds.
NOTES
Your devices turn on or off in the order of the combination listed in the One For All SmartControl setup. After the master power sequence has been completed, the remote control will be able to send other commands.
If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s). This action is normal.
If you need to individually power devices on or off, select that device (using the left or right device key) and press the POWER key.
Excluding a device from Master Power
You can keep devices separate from the One For All
3MART#ONTROL
4OOEXCLUDECALDEVICE FRO | ASTERAPOWER |
1.Press and hold the SETUP key until the blue ring flashes twice.
2.Press the key for the activity you want to modify.
&OROEXAMPLE IFMYOULWANT TOITURN A DEVICEWON AND OFFF independently when you’re watching TV, press the 
key.
3.Use the device selection keys to highlight the device you want to turn on/off independently.
4.Press 
.
This device will no longer be turned on or off by the master power command in this activity.
If you want to include the device in One For All SmartControl Master Power again, just repeat steps
14
