ACROS
The One For All SmartControl remote can condense multi- step activities to a single keypress. These are called “macros”. &OROEXAMPLE YOU COULD MAKEYTHEUON DE AND key perform a series of steps when you’re finished watching a DVD: (1) stop the DVD, (2) turn the DVD player off, and (3) turn your TV off.
Note: A macro can contain up to 15 steps.
4OOSETSUP A ACRO
1.Press and hold the SETUP key until the blue ring flashes twice.
2.Press 9 9 5. The blue ring flashes twice.
3.0RESSETHESKEYTYOUEWANT TOYUSEYTO EXECUTE THE MACRO
&OROEXAMPLE IFMYOULWANT THE ON DE AND key to trigger the steps to stop a DVD, turn the DVD player off, and turn off the TV, press the ON DE AND key in this step.
4.Use the device select keys to highlight the device mode for the first step in the macro.
&OROEXAMPLE IFMTHELlRST STEPFIS TOHSTOP A $6$ THIGHLIGHTP DVD.
5.Press the key for the first command in the sequence.
&OROEXAMPLE IFMTHELlRST STEPFIS TOHSTOP A $6$ TPRESSTTHEP
(stop) key.
6.If there are more commands for this device, press the
KEYS FOR THE NEXT COMMANDSN)FXTHERECARENT GO TO STEPT
7.)
&OROEXAMPLE IFMYOULWANT TOITURN THE $6$ PLAYERTOFFFAFTERF you stop the disc, press the 
key.
When you’re finished with commands for this device, go to step 7.
7.Use the device select keys to highlight the device mode
FOROTHE NEXT DEVICEEYOUTWANT TOVUSECIN THE MACROW
&OROEXAMPLE IFMTHELNEXT STEPFIN THE MACRO ISXTO TURNTOFFF the TV, highlight TV.
8.0RESSETHESKEYTFORETHEKNEXT COMMAND INTTHEESEQUENCE
&OROEXAMPLE IFMTHELNEXT STEPFIS TOHTURN OFFFTHET46 PRESSR the 
key.
9.If there are more commands for this device, press the
KEYS FOR THE NEXT COMMANDSN
If you’re finished with this macro, go to step 10.
If you want to use another device in this activity, repeat steps 7 and 8.
10.Press and hold the SETUP key until the blue ring flashes twice.
Congratulations! You have successfully programmed a macro. Now when you press the key you designated as this macro key, the remote will send the steps you programmed.
4OOUSEUAS ACRO
1.Make sure the remote is pointed at the devices this macro uses.
2.Press the key you designated for the macro.
Leave the remote pointed at the devices for several seconds. The macro may take a few seconds to finish.
18
