WWW.ONEFORALL. COM 7
Search MethodIf your device does not respond to the ONE FOR ALL after you have tried
all the codes listed for your brand, try searching for your code. The Search
Method allows you to find the code for your device by scanning through all
the codes contained in the memory of the ONE FOR ALL. The Search
Method may also work if your brand is not listed at all.
To search for your TV code:
1Switch your television on (not on standby).
2 Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the red light (LED) underneath the
POWER key will blink once then twice).
3Press 9 9 1. The red lig ht will blin k twice.
4Next, press POWER.
5Aim the ONE FOR ALL at your Television. Now press CH+
over and over, until your Television turns off (everytime
you press the CH+ key the ONE FOR ALL will send out a
POWER signal from the next code contained in the memo-
ry). You may have to press this key many times (up to 150
times) so please be patient. If you skip past a code, you
can go to the previous code(s) by pressing the CH- key.
Remember to keep pointing the ONE FOR ALL at your
Television while pressing this key.
6As soon as your television turns off, press MAGIC to store
the code.
Once you have Set-Up your ONE FOR ALL, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1 Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the red light (LED) underneath the
POWER key will blink once then twice).
2Press 9 9 0. The red lig ht will blin k twice.
3For the first digit of your four-digit code, press 1and
count all the red blinks. If there are no blinks, the digit is
"0".
4For the second digit, press 2and count all the red blinks.
If there are no blinks, the digit is "0".
5For the third digit, press 3and count all the red blinks.
If there are no blinks, the digit is "0".
6For the fourth digit, press 4and count
all the red blinks. If there are no blinks, the digit is "0".
Now you have your four-digit code.
Important note:
- Most TV’s do not switch on pressing the POW ER key. Please try pressing a
“number” key or the “TV-text off” key to switch your TV back on.