Installation

Before you start, please read these instructions carefully

Setting Up Your Devices

Example: To set up the ONE FOR ALL 4 for your television:

1

Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

ONE

FOR

 

 

 

 

3,041

0000897,0093,036

00217,0216

 

0264

 

0516

7,

0087

9,003

 

216,000

000033671,,00227048,0371

Find the code for your device in the Code list. Codes are listed by device type and brand name.

The most popular code is listed first. Make sure your device is switched on (not on standby).

2

3

4

5

_ _ _ _

Press the TV key on the ONE FOR ALL 4 for the device you wish to Set up.

Press and hold down MAGIC until the red light blinks twice. (The red light will blink once and then twice.)

Enter your four-digit device code using the number keys. The red light will blink twice.

Now, aim the ONE FOR ALL 4 at your device and

press POWER. If your device switches off, the ONE FOR ALL 4 is ready to operate your device.

6Turn your device back on and try all the remote’s functions to ensure they are working properly. If the functions do not work properly, repeat steps 1-5 using another code listed under your brand.

7If your device does not respond, follow steps 1 to 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, or if your brand is not listed at all, try the search method described on page 7.

8Write your code in the four boxes provided in the battery compartment and on page 8 for easy future reference.

Important notes:

-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.

-If your VCR’s original remote control does not have a POWER key, press PLAY instead of POWER during step 5.

-Remember to press the correct device key before operating your device. Only one device can be assigned to a device key. If your original remote operates more than one device, you need to set up each device separately.

Devices can be found under the following keys:

Television

Video Recorder

(*) Television /

(*) Video Recorder /

(*) Satellite Receiver/

Cable Converter

Satellite Receiver /

Cable Converter

To set up a second TV, VCR or SAT (see page 8).

(*) To use the AUX key (see page 8).

6

WWW.ONEFORALL.COM

Page 6
Image 6
One for All URC-7542 manual Installation, Setting Up Your Devices, Example To set up the ONE for ALL 4 for your television