Attaching Peripherals
Step 6 After the workstation and IGX node interface have been set up, Cisco WAN Manager can be started. After Cisco WAN Manager has started and the communication sockets are active, the dsplan screen looks like this:
D2.cb1 | LAN cisco IGX 8410 | 9.3 Feb. 27 2000 14:27 PST |
Active IP Address: | 192.187.207.21 | |
IP Subnet Mask: | 255.255.255.0 | |
TCP Service | Port: | 5130 |
Default Gateway IP Address: | 192.187.207.1 | |
Maximum LAN | Transmit Unit: | 1500 |
Ethernet Address: | 00.55.43.00.04.55 | |
Control Socket - Ready |
| |
Base Socket | Descriptor - 1 |
|
Open Socket | Descriptor - 2 |
|
Last Command: dsplan
Next Command:
Note “Sockets” is the BSD UNIX name for connections between processes and typically applies to network communication.
Note Before switching on the Cisco WAN Manager workstation, refer to the Cisco WAN Manager Operations publication.
