Cisco Systems IGX 8400 Series manual Preparing the Cards -2 IGX 8410 Cards, Front View, H8385

Preparing the Cards

Figure 3-2 IGX 8410 Cards, Front View

N P M

N P M

A

R

M

H8385

General purpose card slots

Note Opening the door requires a 5/32-inch Allen wrench. Cisco provides this in a combination tool (Part No. 218705).

Caution When handling the cards, wear a wrist strap to prevent damage to the cards from electrostatic discharge. The IGX 8410 cabinet has an attached wrist strap both at the front and back.

Card Installation and Node Startup 3-3