Extron electronic CrossPoint 84 manual Installationstallation, cont’d, Rack Mounting the Switcher

Installationstallation, cont’d

Rack Mounting the Switcher

The CrossPoint 84, 88, 124, and 128 Matrix Switchers are housed in rack-mountable, 3U high, 19” wide metal enclosures. The CrossPoint 168 and 1616 are in 6U high enclosures. The appropriate rack mount kit is included with each switcher. Rack mount the switcher as follows:

1.	Insert the switcher into the rack, align the holes in the mounting bracket with
	those of the rack.
2.	Secure the switcher to the rack using the supplied machine screws.

Cabling and Rear Panel Views

All connectors are on the rear panel. Figure 2-1 shows the CrossPoint 128HVA. The CrossPoint 84, 88, and 124 are housed in the same 3U enclosure, but have fewer input and/or output connectors to accommodate the different matrix sizes each provides. Figure 2-2 shows the CrossPoint 1616HVA. The CrossPoint 168 is housed in the same 6U enclosure, but has fewer output connectors to accommodate its 16x8 matrix.

1	2		3	4	5	6	7	8	9	10	11	12		1	2	3	4	5	6	7	8
2
1
1	2	3	4		5	6	7	8	9	10	11	12	1	2	3	4	5		6	7	8

3

6

4 5

Figure 2-1 — Rear panel connectors, CrossPoint 128HVA

1	3	5	7	9	11	13	15	1	3	5	7	9	11	13	15
2	4	6	8	10	12	14	16	2	4	6	8	10	12	14	16

1	3	5	7	9	11	13	15	1	3	5	7	9	11	13	15
2	4	6	8	10	12	14	16	2	4	6	8	10	12	14	16

1	3	5	7	9	11	13	15	1	3	5	7	9	11	13	15
2
2	4	6	8	10	12	14	16	2	4	6	8	10	12	14	16

1	3	5	7	9	11	13	15	1	3	5	7	9	11	13	15
2	4	6	8	10	12	14	16	2	4	6	8	10	12	14	16
								1 3 5 7

1	3	5	7	9	11	13	15	1	3	5	7	9	11	13	15
2	4	6	8	10	12	14	16	2	4	6	8	10	12	14	16

1 3 5 7

1

4 5

Figure 2-2 — Rear panel connectors, CrossPoint 1616HVA

3

6

Power connection

1AC power connector — Plug a standard IEC power cord into this connector to connect the switcher to a 100 to 240VAC, 50 Hz or 60 Hz power source.

2-2 CrossPoint Matrix Switchers • Installation