Extron electronic CrossPoint 124 Operationeration, cont’d, Front Panel Controls and Indicators

Operationeration, cont’d

Front Panel Controls and Indicators

The front panel controls (figure 3-1 and figure 3-2) are grouped into two sets. The input and output buttons and LED indicators are grouped on the left side of the control panel. The control buttons and input/output (I/O) selection buttons and indicators are grouped on the right side of the panel.

While the number of inputs and outputs varies depending on the size of the matrix, there are only two front panel arrangements. The CrossPoint 84, 88, 124, and 128 have 12 input buttons and 8 output buttons (figure 3-1). The CrossPoint 168 and 1616 have 16 input buttons and 16 output buttons (figure 3-2).

1			9
					INPUTS
											CONTROL					I/O
						INPUTS
1	2	3	4	5	6	7	8	9	10	11	12
												CONTROL					I/O
1	2	3	4	5	6	7	8				ENTER	PRESET	VIEW	ESC		RGBHV	AUDIO
				OUTPUTS
		OUTPUTS											CROSSPOINT MATRIX SERIES SWITCHER
2						9					3	4	5	6		7	8
Figure 3-1 — Front panel, CrossPoint 128 HVA
1		9
				INPUTS
													CONTROL				I/O
																	RGBHV
				OUTPUTS
2								9					3	4	5	6	7	8
Figure 3-2 — Front Panel, CrossPoint 1616 HVA

Definitions

The following terms apply to Extron Matrix Switchers, and are used throughout this manual:

Tie — An input-to-output connection.

Set of ties — An input tied to two or more outputs. (An output can never be tied to more than one input.)

Configuration — May consist of one tie or one or more sets of ties.

3-2 CrossPoint Matrix Switchers • Operation