Extron electronic CrossPoint 128, CrossPoint 88 manual 5 - Example 2 Adding a video tie, Press

output 3, output 4, and output 8; and audio input 5 tied to audio output 3, output 4, and output 8.

				5			LED key:			= off,	= on, B = blinking,		Press
			Press						F	= flash once			B
						C
													RGBHV
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12
												CONTROL	I/O
1	2	3	4	5	6	7	8					ENTER PRESET VIEW	ESC RGBHV AUDIO
			OUTPUTS
				C				C			Press	Press	F
B		3	4				8
Press												E	A

D

1

ENTER ESC

Figure 3-5 — Example 2: Adding a video tie

Example 3: Remove a tie from a set of video and audio ties

See figure 3-6 and the following steps for an example in which an existing audio tie is removed from the current configuration.

				5					LED key:		= off,	= on,
			Press								F = flash once
						C
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12

Press

B

AUDIO

CONTROL I/O

1 2

3

4 5 6 7 8

OUTPUTS

ENTER PRESET VIEW ESC RGBHV AUDIO

	C	C	Press	F
3	4	8

ESC

Figure 3-6 — Example 3: Selecting audio, selecting input 5

A

APress and release the Esc button. The Esc LED flashes once.

BIf necessary to select audio-only for the tie, press and release the RGBHV and Audio buttons until the RGBHV LED is off and the Audio LED lights.

CPress and release the input 5 button. The input 5 LED lights. If the steps in Example 1 have been completed, the output 3, output 4, and output 8 LEDs light to indicate ties created in Example 1.

The output 1 LED does not light even if the steps in Example 2 were completed because Example 2 added a video tie only.

DPress and release the output 4 button (figure 3-7). The output 4 LED turns off, while the output 3 and output 8 LEDs remain lit.

CrossPoint Matrix Switchers • Operation 3-7