Extron electronic 84, 88, 124, 128, 168, 1616 HV, 1616HVA CrossPoint Matrix Switchers Operation

		LED key:			= off,			= on,				Press	Press
					F = flashes once						Press		C
					INPUTS						B	RGBHV	AUDIO
1	2	3	4	5	6	7	8	9	10	11	12	VIEW

CONTROL

I/O

1 2

3 4 5 6 7 8 ENTER PRESET VIEW ESC RGBHV AUDIO

OUTPUTS

C Press F

2 5 6 7

A

ESC

Figure 3-8 — Example 4: Viewing the current configuration, no input selected

Example 4 shows the process of viewing the current configuration after the steps in Examples 1, 2, and 3 have been performed.

APress and release the Esc button. The Esc LED flashes once.

BPress and release the View button to enter view-only mode. The View LED lights.

CIf necessary to select both video and audio for viewing, press and release the RGBHV and Audio buttons until the RGBHV LED and Audio LED light. With no input LED selected, all output LEDs that have no established ties light.

DPress and release the input 5 button (figure 3-9). The input 5 LED lights.

If ties are established for input 5, all output LEDs toggle; outputs with no ties turn off and the LEDs associated with all outputs tied to input 5 (audio, video, or audio and video ties) light. If no ties are established for input 5, all output LEDs turn off.

If audio is broken away, the Audio LED blinks.

				5
			Press					LED key:			= off,	= on, B = blinking
			D
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12

B D

RGBHV AUDIO

CONTROL

I/O

1 2 3

4 5 6 7 8

OUTPUTS

ENTER PRESET VIEW ESC RGBHV AUDIO

D

1 3 4 8

Figure 3-9 — Example 4, step D: Viewing the current configuration, video and audio

A set of ties can also be viewed by selecting a tied output. To demonstrate this, note the number of a lit output LED and press and release the output button for an unlit (untied) output LED. Observe that all of the untied outputs light. Then press the output button for the output LED noted previously and observe

CrossPoint Matrix Switchers • Operation 3-9